Device Covers
Metal Device Covers attach to the front of receptacles and switches to protect from possible damage caused by drywall installation or painting. The covers are replaced later with faceplates at the trim out phase of construction.
Material: Covers are galvanized steel. Hardware is zinc-plated steel.
| CATALOG NO. (EA) | BOX SIZE | INCLUDED HARDWARE |
| DC-1 | SINGLE GANG | (2) #8-32 SCREWS |
| DC-2 | DOUBLE GANG | (4) #8-32 SCREWS |
Plastic Device Covers attach to the front of receptacles, switches or can be snapped onto empty mud rings to keep them clean, dust free and finish ready during the taping and painting process. The covers are replaced later with faceplates at the trim out phase of construction.
| CATALOG NO. (EA) | BOX SIZE/DEVICE TYPE | INCLUDED HARDWARE |
| DCP-1 | Single gang receptacle | (2) #8-32 screws |
| DCP-2 | Double gang receptacle | (2) #8-32 screws |
| DCP-3 | Three gang receptacle | (2) #8-32 screws |
| DCP-4 | Four gang receptacle | (2) #8-32 screws |
| DCP-1T | Single gang toggle switch | (2) #8-32 screws |
| DCP-2T | Double gang toggle switch | (2) #8-32 screws |
| DCP-3T | Three gang toggle switch | (2) #8-32 screws |
| DCP-4T | Four gang toggle switch | (2) #8-32 screws |
| DCP-DT | Double gang toggle switch and device | (2) #8-32 screws |
| DCP-1R | Single gang plaster ring only | None |
| DCP-2R | Double gang plaster ring only | None |
| DCP-3R | Three gang plaster ring only | None |
| DCP-4R | Four gang plaster ring only | None |
| DCP-R | 3" Round plaster ring only | None |